Page Comparison - Creating a Wipe and Load (Non-destructive) WSA Deployment Application (v.3 vs v.4)

Panel

bgColor	white
titleColor	White
borderWidth	1
titleBGColor	orange
title	Who can do this?

Shopping administrators with the privileges to create WSA applications in Shopping.

Panel

bgColor	white
titleColor	white
borderWidth	1
titleBGColor	orange
title	What is it for?

To enable users to self-service their OS deployments using the Windows Servicing Assistant.

Panel

bgColor	white
titleColor	white
borderWidth	1
titleBGColor	orange
title	Before you start

You must create the deployment task sequence in Configuration Manager – you'll need this for the General Details screen.

A Wipe and Load (Non-destructive) Deployment should be used when the task sequence does not include steps to partition or format the disk. In this scenario, although the majority of the disk content is deleted, the Task Sequence working folder (_SMSTaskSequence) is preserved throughout the entire deployment. Content can be downloaded to the local Nomad cache in preparation, then saved to this folder when the task sequence executes before the disk is wiped. User data can also be stored here also using the hard links feature of the User State Migration Tool (UMST).

Preparation

Before creating a Wipe and Load (Non-destructive) Windows Servicing Assistant Deployment Application in Shopping, ensure you have completed the following in Configuration Manager

Panel

bgColor	white
titleColor	white
borderWidth	1
titleBGColor	#99cccc
title	On this page:

Table of Contents

maxLevel	2
minLevel	2
indent	20px

Create a Task Sequence following the guidelines for Creating a WSA Wipe and Load Non-destructive Task Sequence.
Create an empty Collection that will be targeted with a deployment of the WSA Wipe and Load Non-destructive Task Sequence
Deploy the WSA Wipe and Load Non-destructive Task Sequence created in step 1 to the empty Collection created in step 2. The deployment should be configured as Available (not Required), and scheduled to become available 10 years in the future as indicated below. This prevents the deployment from appearing in Software Center until the available date, thereby preventing the user from executing the task sequence outside the Windows Servicing Assistant.
Image Modified Image Modified

Creating the Wipe and Load Non-destructive WSA Deployment Application

In the Shopping Admin Console, right-click the Applications node and from its context menu, choose New Windows Servicing Assistant Deployment.
Image Modified
On the Welcome screen, click Next.

On the General Details screen:

Populating the General Details screen for your deployment Image Modified

Select Wipe and Load Non-destructive from the Type of Windows Servicing Deployment drop-down.
In the Name field, enter the name of this application as you want it to appear to the end user in the wizard.
Optionally, enter a brief description in the Description field (note that the description, cost and icon are never displayed to the end user for WSA Deployment Applications).
Click Next.

On the SMS/Config Mgr collection screen:

Selecting the collection in the SMS/Config Mgr screen Image Modified

Select the Collection that the Wipe and Load Task Sequence was deployed to (see Preparation above).
From the Deployment drop-down, select the deployment that was created to deploy the Wipe and Load Task Sequence to the Collection selected previously.
Click Next.

On the Permissions screen:

Setting restrictions for the deployment in the Permissions screen Image Modified

If you want this Wipe and Load Deployment to be available to everyone, click Next (i.e. do not restrict the deployment to any users or computers).
If you want to restrict this Wipe and Load Deployment to specific users, click Add (to the right of the User Permissions list) and add the user or group that you want to restrict access to. Repeat to add multiple users or groups.
If you want to restrict this Wipe and Load Deployment to specific computers, click Add (to the right of the Machine Permissions list) and add the computer or group that you want to restrict access to. Alternatively, click Add OU to add an OU that contains the computers that you want to restrict access to. Repeat as appropriate to add multiple computers, groups or OUs.

On the Completing the Windows Servicing Assistant Deployment Wizard screen, click Finish.

Configuring the Wipe and Load (Non-destructive) WSA Deployment

Locating the WSA application you just created Image ModifiedOnce the Wipe and Load (Non-destructive) WSA Deployment has been created, it may be necessary to configure additional properties that are applicable specifically to Wipe and Load (Destructive) deployments.

In the Shopping Admin Console, select the Applications node and double-click the Wipe and Load (Non-destructive) WSA application you just created (it will be listed under WSA as shown below – use the search feature if necessary) to open the Properties dialog.

We are going to walk you through each of the tabs in the Properties dialog for the Wipe and Load (Non-destructive) Deployment and show you what the respective settings do and how they impact the behavior of the deployment in terms of the user experience. There is a masterclass on how to create the deployment at the end of this section.

Panel

borderColor	green
bgColor	white
titleColor	white
borderWidth	1
titleBGColor	green
title	The General tab

The General tab

The Start screen

Anchor

	shp55-wsa-general
	shp55-wsa-general

Image Modified

The General tab is populated with the settings defined when the application was created. It controls what is displayed on the Start screen. You can change the name of the deployment (changing the description, cost and icon has no effect as these are never displayed to the end-user). However, Type cannot be changed.

For example, if you change the name of the deployment from Install or reinstall Windows on this PC to Reinstall Windows on My PC, users see this when they click Launch from the Upgrade to Windows 10 banner in the Shopping Web.

Multimedia

name	Non-destructive general.mp4

Panel

borderColor	green
bgColor	white
titleColor	white
borderWidth	1
titleBGColor	green
title	The ConfigMgr Collection tab

Anchor

	shp55-wsa-configmgr-collection
	shp55-wsa-configmgr-collection

Properties in the ConfigMgr Collection tab

Image Modified

The ConfigMgr Collection tab is populated with the selections made when the application was created. These can be modified if necesasry, but not recommended unless it is to correct an error. If you do modify these, ensure you select a deployment of a Wipe and Load (Non-destructive) Task Sequence.

Panel

borderColor	green
bgColor	white
titleColor	white
borderWidth	1
titleBGColor	green
title	The Permissions tab

Anchor

	shp55-wsa-permissions
	shp55-wsa-permissions

Image Modified

The Permissions tab is populated with the selections made when the application was created. You can modify the permissions from this tab to restrict access to specific users and/or computers.

Panel

borderColor	green
bgColor	white
titleColor	white
borderWidth	1
titleBGColor	green
title	The Applications tab

Anchor

	shp55-wsa-apps
	shp55-wsa-apps

Image Modified

The Applications tab controls what users see on the Applications screen. The list of applications you add to the Applications in OS Image list is displayed on the left of the Applications screen.

Multimedia

name	Non-destructive apps.mp4

If there are standard applications that are included in the OS image or installed by the task sequence, you can let the user know which applications are included by adding them to the Applications in OS Image list.
Note
icon false
This is simply a list of free text strings entered by the administrator. The user is shown the list as it appears in this dialog.

If 1E Application Migration is being used (specifically, if the Wipe and Load Task Sequence includes the 1E Application Migration steps):

Check the Migrate Applications option.

Optionally, check the Display Application Migration list to WSA User option. When this option is selected, the user will see the applications that will be migrated on the Applications screen of the Windows Servicing Assistant.

Note

If Migrate Applications is unchecked, when the task sequence runs the WSA Initialize step will set the 1EWSA_AppMigrationEnabled Task Sequence variable to False.

This variable should therefore be used in a condition on the Migrate Applications group in the task sequence so the group does not execute it if 1EWSA_AppMigrationEnabled=False. If this condition is not applied to the Migrate Applications group in the task sequence, Application Migration steps will be executed even though the Migrate applications option was unchecked in the WSA Deployment properties.

Panel

borderColor	green
bgColor	white
titleColor	white
borderWidth	1
titleBGColor	green
title	The Storage tab

Anchor

	shp55-wsa-storage
	shp55-wsa-storage

Image Modified

The Storage tab controls what options are available to the user depending on whether they are in the office or are remote (connected via VPN with no local peers).

For Office based users:

Check the Download content if not available in local network option (default) to ensure the WSA downloads any any reference content for the task sequence (including any dynamic content required for Application Migration) that is not available in its own Nomad cache or from any peers on the local network.

Note
If the Allow deployments over WiFi option is enabled in the Connection tab, Download content if not available in local network and Download content if not available in local cache will be selected and disabled.

Check the Download content if not available in local cache option to ensure the WSA downloads all reference content for the task sequence to the local Nomad cache. This will potentially increase the time to complete the readiness stage of the wizard but will speed up the actual deployment once the task sequence is executed.
- Check the Use USB media if insufficient disk space option (default) if you want to enable users to use USB media to store content to be downloaded if there is insufficient space on the hard disk. If USB drives are prohibited in your environment you will need to uncheck this option, in which case the WSA wizard will prevent the user from executing the task sequence if there is insufficient disk space to download all required task sequence content.
  Note
  The WSA requires NTFS formatted USB media to store content. When prompted to insert/select USB media, the user will not be able to select USB media with any other format.
- Check the Clean USB when finished option (only enabled if Use USB media if insufficient disk space is checked) to have the WSA remove any content it added to the USB media when the task sequence has finished.

For remote users:

Content will always be downloaded to the local Nomad cache as the assumption is there will be no local peers:

The Use USB Media if insufficient disk space option is checked by default. Uncheck this if users are not allowed to use USB disks. If this option is unchecked and there is insufficient space on the local disk to store all the required content, the WSA will prevent the user from executing the deployment.
- Check the Clean USB when finished option to have the WSA remove any content it added to the USB media when the task sequence has finished.

Anchor
shp55-driver-pkgs
shp55-driver-pkgs
Driver Packages:

Check the Download only applicable driver packages if the task sequence includes any Install Driver Package or Download Driver Package steps and you want to reduce the amount of content downloaded. By default, the WSA will download all driver packages referenced in the task sequence. By enabling this option, the WSA will parse the task sequence and only download drivers that meet the condition defined on the Install Driver Package or Download Driver Package step. If unchecked, the WSA will download all referenced driver packages and may therefore require more time and disk space.
Note
WSA is only able to evaluate single WMI conditions in the Install Driver Package steps. If multiple conditions are defined, only the first will be evaluated.

Check the Fail readiness check if no applicable driver package is found option to fail the readiness checks if the Task Sequence does not include any drivers applicable to the current device.

Note
Typically, virtual machines will not have any applicable drivers, so ensure the Fail readiness check if no applicable driver package is found option is not selected when testing with virtual machines.

Hash checking:

WSA will perform a content hash check on all downloaded content as part of the readiness checks. As the readiness checks may be run a second time (when the user actually starts the deployment), you can avoid the hash checks being repeated within the time period defined in the Do not repeat hash check within option. The value is defined in minutes between 0 and 480 minutes (8 hours) - 0 will result in hash checks always being performed.

Panel

borderColor	green
bgColor	white
titleColor	white
borderWidth	1
titleBGColor	green
title	The Data Capture tab

Anchor

	shp55-wsa-data-capture
	shp55-wsa-data-capture

Image Modified

The Data Capture tab controls the options available to the user on the User Backup screen.

Multimedia

name	Non-destructive backup.mp4

Check Do not capture user files and settings if the users do not have local files or settings that must be preserved. If this option is checked the other options are disabled and the following points do not apply.

Note
When you select this option, WSA will not attempt to calculate space required for user data. When the WSA Actions - Initialize step runs in the task sequence, a variable named 1ESkipUserStateCapture will be created and set to true. If the task sequence includes steps to capture data, these should be conditioned to only execute if 1ESkipUserStateCapture is not true.

The message displayed to the user on the Data Capture screen (the default is Select the folders and files you want backed up) can be customized by modifying it in the text in the box.

Note

icon	false

If you are not allowing users to select folders to be backed up (see Allow user to backup folders below), you will need to modify this message as the user will not be prompted to select folders and the wizard screen will be blank other than this message. It may also be useful to warn the user in this message that when they click Next, the wizard will calculate space required, which could take several minutes.

Check the Allow user to backup folders option to allow users to select which folders they want to be included in the capture. To prevent users selecting certain folders, enter them in the text box using the pipe character to separate them.

The greyed-out text box lists the global folder exclusions defined in the WSA System Folder Exclusions setting in Shopping. These can be modified in the Shopping Admin Console as indicated below.

Global folder exclusions Image Modified

Note

icon	false

For a Non-destructive Wipe and Load Data Capture will use hard links, therefore the options to use Nomad Peer Backup Assistant or USB are not present on this tab as they are with other deployment types.

User Backup exceptions and how to fix them

These must be resolved before the deployment can continue:

We've found something that prevents us from continuing at this time. Please retry later, or contact your administrator if the issue continues to occur.

Error code	Likely causes	Remedial action
0x00001001	Communication error – failure to send a size estimation message to the Tachyon service.	Ensure the Tachyon service is up and running.
0x00001002	Timeout duration exceeded – the Tachyon service was not able to send a size estimation message for over the 1 minute timeout duration.	Ensure the Tachyon service is up and running.
-1	Task is cancelled.
0x0100	Failure to get task sequence references from the Shopping API	Ensure that the Shopping Web is up and running. In Configuration Manager, ensure that the Shopping AppPool user is granted the Read-only Analyst role.
0x0101	Source machine does not exist in SLA platform. Missing or invalid SLA platform credentials under Settings in Shopping Admin Console.	Ensure that the source machine exists in the SLA platform. If it does not, run a sync to refresh the data. Ensure that the SLA platform credentials are correct under Settings in Shopping Admin Console.
0x0102	Unable to get USMT Capture step configuration.	Ensure that the task sequence contains a Capture step.
0x0103	Unable to get the task sequence XML as: The Shopping server is unavailable. The Shopping AppPool user has not been granted the Read-only Analyst role in Configuration Manager.	Ensure that the Shopping Web is up and running. In Configuration Manager, ensure that the Shopping AppPool user is granted the Read-only Analyst role.
0x0204	Missing details in the WSA order.	Contact 1E Support for assistance.
0x0300	Unable to fetch Nomad cache size details.	Ensure that the Nomad service is running and get the user to retry.
0x0301	Unable to get content location.	Ensure that Nomad service is running and the client machine is present in the required boundary groups and get the user to retry.
0x0302	Unable to find PBA host.	Ensure that the PBA hosts are responsive by running a ping, check the PBA configuration and get the user to retry.
0x0400	Unable to locate applicable driver package in the task sequence for this machine.	Ensure that the task sequence contains driver package valid for that machine. Otherwise, modify the WSA application settings in Shopping Admin console such that it does not fail when drivers are not available.
0x0406	Unable to locate USMT Package in the task sequence references.	Ensure that the USMT package is referenced in the task sequence.
0x0602	ScanState.exe unable to estimate user state data size.	Ensure that the Tachyon service is up and running. If it is running, check scanstate.log (its location is found in TachyonAgent.log).
0x0603	Unable to locate a compatible version of Nomad.	Ensure that you have Nomad 6.3.200 or later installed.

Panel

borderColor	green
bgColor	white
titleColor	white
borderWidth	1
titleBGColor	green
title	The Readiness tab

Anchor

	shp55-wsa-readiness-checks
	shp55-wsa-readiness-checks

Image Modified

The Readiness Checks tab lets you choose the machine readiness tests in the Readiness screen.
Image Modified

- Check Do not start the task sequence if this device is currently storing data captured from another device if you want the WSA to prevent the task sequence from executing if the Nomad agent on the local machine is currently storing user data from one or more peers.
- Check Do not start the task sequence if this device is currently serving a boot image to another device if you want the WSA to prevent the task sequence from executing if the local machine is currently serving a boot image to a peer.
- Check Do not start the task sequence if this device is currently running on battery if you want the WSA to prevent the task sequence from executing if the local machine is currently running on battery.

Panel

borderColor	green
bgColor	white
titleColor	white
borderWidth	1
titleBGColor	green
title	The Connection tab

Anchor

	shp55-wsa-connection
	shp55-wsa-connection

Image Modified

The Connection tab controls whether or not the user can execute execute the deployment on a wireless connection and whether they are prompted for VPN credentials and wireless connection details in the Connection screen.
Image Modified

Check Require user enter VPN credentials if the task sequence includes a step to establish a VPN connection that requires user credentials.

Note
If this option is enabled, when the WSA runs, if the user selects remote location (i.e. not in the office) they will be required to enter their VPN credentials. When the task sequence executes the WSA Initialize step, these credentials are stored in the `1EWSA_VpnUserName` and `1EWSA_VpnPassword` Task Sequence Variables.

Check Allow deployments over WiFi if you want users to be able to execute the deployment on a wireless connection.

Note
Enabling this option in a Non-destructive Wipe and Load Deployment will modify the settings on the Storage tab for office based users. Specifically, it sets (and disables, thereby forcing) the options Download content if not available in local network and Download content if not available in local cache.

The Require user enter SSID and password option is only enabled if Allow deployments over WiFi is checked. Check this option if the task sequence includes a step to establish a wireless connection that requires the SSID and password to be provided.

Note
If this option is enabled, when the WSA runs it will prompt the user to select a WiFi SSID (from those currently available) and enter the password. When the task sequence executes the WSA Initialize step, these credentials are stored in the `1EWSA_WifiSsid` and `1EWSA_WifiPassword` Task Sequence variables.

Panel

borderColor	green
bgColor	white
titleColor	white
borderWidth	1
titleBGColor	green
title	The Location tab

The Location tab controls is displayed for the user to tell us where they are initiating the deployment. If you choose to hide the Location page you must specify the location users will see, either Office or Remote.
The Location screen

Multiexcerpt include

MultiExcerptName	wss30-faq-ui-location
PageWithExcerpt	WSA FAQs

Multiexcerpt

MultiExcerptName	shp55-wsa-errors-general

Panel

borderColor	green
bgColor	white
titleColor	white
borderWidth	1
titleBGColor	green
title	Other operational errors

Anchor

	shp55-wsa-complete
	shp55-wsa-complete

Exceptions on Completion screen and how to fix them

Error code	Likely causes	Remedial action
0xA0070700	The task sequence failed to start.	This is not likely to happen happen unless the Windows Management Instrumentation (WMI) is corrupted. If this happens, get the user to rerun the deployment. Error is displayed on the Completion screen as follows: Something went wrong with the deployment. Please contact your local administrator.
0xA0070701	SCCM execution history is missing.	Check the status messages in Configuration Manager for the task sequence deployment as well as the ExitCode in the WSA execution history for the Task Sequence package id ( `HKEY_LOCAL_MACHINE\SOFTWARE\1E\WSA\TSExecutionHistory\TSPkgID`) Error is displayed on the Completion screen as follows: Something went wrong with the deployment. Please contact your local administrator.
0xA0070702	WSA execution history is missing – most likely cause is that the task sequence failed in WinPE.	Check the status messages in Configuration Manager. Error displayed on the Completion screen as follows: Something went wrong with the deployment. Please contact your local administrator.
0xA0070703	Unable to establish a WIFI connection.	Get the user to run the deployment again with the emphasis on providing their correct connection credentials – on the Connection screen, click Reveal to check the accuracy of the password they entered. Error displayed on the Completion screen: There was a problem connecting to the WiFi network. Please rerun the Assistant and ensure that the WiFi connection details are entered correctly
0xA0070704	Unable to establish a VPN connection.	Get the user to run the deployment again with the emphasis on providing their correct connection credentials – on the Connection screen, click Reveal to check the accuracy of the password they entered. Error displayed on the Completion screen: There was a problem connecting to the VPN. Please rerun the Assistant and ensure that the VPN connection details are entered correctly
0xA0070705	WSA execution history is invalid.	Contact 1E Support for assistance for assistance. Error displayed on the Completion screen as follows: Something went wrong with the deployment. Please contact your local administrator.

Masterclass video

Anchor

	shp55-non-destructive-masterclass
	shp55-non-destructive-masterclass

Panel

borderColor	orange
bgColor	white
titleColor	white
borderWidth	1
titleBGColor	orange
borderStyle	solid
title	A masterclass in creating a Wipe and Load (Non-destructive) WSA Deployment Application

1eanimation

src	WSA Wipe and Load Non-destructive masterclass.mp4
loop	false
control	true
autoplay	false

Page tree

Versions Compared

Old Version 3

New Version Current

Key

Preparation

Creating the Wipe and Load Non-destructive WSA Deployment Application

Configuring the Wipe and Load (Non-destructive) WSA Deployment

For Office based users:

For remote users:

Anchor
shp55-driver-pkgs
shp55-driver-pkgs
Driver Packages:

User Backup exceptions and how to fix them

Masterclass video

Page tree

Versions Compared

Old Version 3

New Version Current

Key

Preparation

Creating the Wipe and Load Non-destructive WSA Deployment Application

Configuring the Wipe and Load (Non-destructive) WSA Deployment

For Office based users:

For remote users:

Anchorshp55-driver-pkgsshp55-driver-pkgsDriver Packages:

User Backup exceptions and how to fix them

Masterclass video

Anchor
shp55-driver-pkgs
shp55-driver-pkgs
Driver Packages: