Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Summary

Excerpt

Settings available in the 1E Client configuration file, with details of which settings are mandatory or optional during installation, and which settings can be re-configured post-installation.


Multiexcerpt
MultiExcerptNameManageSettings

1E Client installers include a template configuration file that contains the more important settings with default values that match hard-coded default values. The configuration file is updated during installation.

After installation, configuration file settings can be managed using 1E Client reconfiguration, Tachyon Explorer configuration instructions, Tachyon Guaranteed State policies, Configuration Manager baselines or other means. Registry settings can also be managed by Windows Group Policy.

1E Client installer zips

Multiexcerpt
MultiExcerptNameTachyonAgentZips

Zip files for 1E Client installers can be downloaded from the 1E support portal page (https://1eportal.force.com/s/1eclienttopicdetail). The following installer zips are available and contain the following files, where 5.1.0x.xxx is a specific build:

1EClient.v5.1.
0
x.xxx.zip1EClient_Non-Windows.v5.1.
0
x.xxx.zip
1EClient_Android.v5.1.0.xxx.zip
  • Licenses.txt
  • 1E
Client Release Information
  • Client release information.html
  • 1EClient-x64.msi
  • 1EClient-x86.msi
  • Licenses.txt
  • 1E
Client Release Information
  • Client release information.html
  • 1e.client-CentOS_
7
  • 8.1_x64_v5.1.
0
  • x.xxx.rpm
  • 1e.client-Debian_10.4_x64_v5.1.x.xxx.deb
  • 1e.client-Fedora_
21
  • 32_x64_v5.1.
0
  • x.xxx.rpm
  • 1e.client-
macOSX
  • macOS_v5.1.
0
  • x.xxx.dmg
  • 1e.client-
macOSX
  • macOS_v5.1.
0
  • x.xxx.pkg
  • 1e.client-openSUSE_
42
  • Leap_15.1_x64_v5.1.
0
  • x.xxx.rpm
  • 1e.client-RHEL_7.1_x64_v5.1.
0
  • x.xxx.rpm
  • 1e.client-
SLES
  • RHEL_
12
  • 8.
2
  • 1_x64_v5.1.
0
  • x.xxx.rpm
  • 1e.client-
Solaris
  • SLES_
11
  • 15.
3
  • 1_
SPARC
  • x64_v5.1.
0
  • x.xxx.
p5p
  • rpm
  • 1e.client-Solaris_11.3_
x64
  • SPARC_v5.1.
0
  • x.xxx.p5p
  • 1e.client-
Ubuntu
  • Solaris_
14
  • 11.
04
  • 4_x64_v5.1.
0
  • x.xxx.
deb
  • p5p
  • 1e.client-Ubuntu_
14
  • 18.04_
x86
  • x64_v5.1.
0
  • x.xxx.deb
  • Licenses.txt
  • 1E Client Release Information.html
  • 1E.Client-5.1.0.xxx.apk

Please refer to Supported Platforms: 1E Clients for details of supported OS versions and their prerequisites.



Advanced Panelboxes for Confluence
id1
titleOn this page:

Table of Contents
maxLevel3
minLevel2
indent20px
excludeSummary|On this page|In this section...
separatornewline


Advanced Panelboxes for Confluence
id1
titleIn this section:
Children Display
depth2
styleh5
excerpttrue


Deploying the 1E Client

Windows computers

When deploying 1E Client to Windows devices you can install using the MSI interactively but this only allows you to specify some configuration settings. You can configure these and some other settings using installer properties on the command-line or in one or more MST transform files. 

Multiexcerpt include
MultiExcerptNameWhyInstallerTransforms
PageWithExcerptDeploying 1E Client on Windows
 

Please refer to:

Non-Windows devices

Please refer to:

1E Client settings

Configuration settings can be set during or after installation, depending on the platform, as described in the table below. Installer command-lines are described in Deploying 1E Client on Windows.

PlatformNotes
Windows
  • Some settings may be set during installation and others can only be set in the configuration file
  • Setting names are not case sensitive
  • Windows installer properties are not case sensitive
  • Nomad, PXE Everywhere, and WakeUp client modules have settings that are stored in the registry instead of the configuration file
Linux
  • Settings may be set during installation or modified in the configuration file
  • Setting names are not case sensitive
Mac and Solaris
  • Settings must be set after installation using the supplied bash script
  • Setting names are not case sensitive

The following applies to all configuration settings that are stored in the 1E Client configuration file:

  • they can be reconfigured after installation either manually or as described in 1E Client command-line parameters
  • property names and values are not case-sensitive, but convention is to store them in mixed-case
  • if you omit a mandatory property or its value, the 1E Client will not start
  • if you omit an optional property or its value, the 1E Client will use the default value instead


1E Client configuration file location and name

Multiexcerpt
MultiExcerptNameAgentConfFile

The 1E Client is controlled via the 1E Client configuration file 1E.Client.conf which resides in the installation folder along with the 1E Client executable.

The default installation location used for the different OS supported by the 1E Client are given in the following table:

Section


Column
width50%


OSDefault install location
Windows%ProgramFiles%\1E\Client
Linux and Solaris/etc/1E/Client
Mac'/Library/Application Support/1E/Client'

1E Client running on Android is configured using the Application Preferences interface, not based on a configuration file.


Column


Note

The configuration file uses ASCII encoding.

A comment line starts with the # symbol.



Column
width20%





Installer properties

The following are lists of all installer properties for 1E Client modules and features. Those listed in mixed case are stored in the  1E Client configuration file , and those listed in UPPERCASE are stored in the registry. 

Note

Multiexcerpt include
MultiExcerptNameCase-InstallerProperties
PageWithExcerpt1E Client settings


Configuration settings

The following are lists of all settings stored in the 1E Client configuration file, used by 1E Client modules and features. Where relevant, the locations of Windows registry settings are provided.

Note

Multiexcerpt include
MultiExcerptNameCase-FileRegistry
PageWithExcerpt1E Client settings



Info

Installer properties for Windows:

Multiexcerpt include
MultiExcerptNameInstaller properties
PageWithExcerpt1E Client settings



Info

Configuration file settings:

Multiexcerpt include
MultiExcerptNameConfigurationFileSettings
PageWithExcerpt1E Client settings

1E Client has no registry settings, however InstallationDirectory is stored in HKLM\SOFTWARE\1E\Client.


Info

Installer properties for Windows and non-Windows. Some settings are only available for Windows, and some are not available as installer properties.

Multiexcerpt include
MultiExcerptNameConfigurationFileSettings
PageWithExcerptTachyon client settings



Info

Configuration file settings for Windows and non-Windows. Some settings are only available for Windows.

Multiexcerpt include
MultiExcerptNameConfigurationFileSettings
PageWithExcerptTachyon client settings

Multiexcerpt include
MultiExcerptNameSettingsWithoutInstallerProperties
PageWithExcerptTachyon client settings

Tachyon client has no registry settings, however some data is stored in HKLM\SOFTWARE\1E\Client\Persist.


Info

Installer properties for Windows:

Multiexcerpt include
MultiExcerptNameInstaller properties
PageWithExcerptNomad client settings



Info

Configuration file settings:

Multiexcerpt include
MultiExcerptNameConfigurationFileSettings
PageWithExcerptNomad client settings

Nomad client stores its settings under the registry key HKLM\SOFTWARE\1E\NomadBranch.

For details of Nomad client registry settings, please refer to installer properties.


Info

Installer properties for Windows:

Multiexcerpt include
MultiExcerptNameInstaller properties
PageWithExcerptPXE Everywhere Agent settings



Info

Configuration file settings:

Multiexcerpt include
MultiExcerptNameConfigurationFileSettings
PageWithExcerptPXE Everywhere Agent settings

PXE Everywhere Agent stores its settings under the registry key HKLM\SOFTWARE\1E\PXEEverywhere.

For details of PXE Everywhere Agent registry settings, please refer to installer properties.


Info

Installer properties for Windows:

Multiexcerpt include
MultiExcerptNameConfigurationFileSettings
PageWithExcerptShopping client settings



Info

Configuration file settings:

Multiexcerpt include
MultiExcerptNameConfigurationFileSettings
PageWithExcerptShopping client settings

Shopping client and WSA have no registry settings.

WSA stores information under the registry key HKLM\SOFTWARE\1E\WSA.


Info

Installer properties for Windows:

Multiexcerpt include
MultiExcerptNameInstaller properties
PageWithExcerptWakeUp client settings



Info

Configuration file settings:

Multiexcerpt include
MultiExcerptNameConfigurationFileSettings
PageWithExcerptWakeUp client settings

WakeUp client stores its settings under the registry key HKLM\SOFTWARE\1E\WakeUpAgt.

For details of WakeUp client registry settings, please refer to installer properties.