Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Summary

Excerpt

Settings available in the 1E Client configuration file, with details of which settings are mandatory or optional during installation, and which settings can be re-configured post-installation.


Multiexcerpt
MultiExcerptNameManageSettings

1E Client installers include a template configuration file that contains the more important settings with default values that match hard-coded default values. The configuration file is updated during installation and named 1E.Client.conf in the installation folder along with the 1E Client executable.

After installation, configuration file settings can be managed using 1E Client reconfiguration, Tachyon Explorer configuration instructions, Tachyon Guaranteed State policies, Configuration Manager baselines or other means. Registry settings can also be managed by Windows Group Policy.

1E Client installer zips

Multiexcerpt
MultiExcerptNameTachyonAgentZips

Zip files for 1E Client installers can be downloaded from the 1E support portal page (https://1eportal.force.com/s/1eclienttopicdetail). The following installer zips are available and contain the following files, where 58.2.0.x.xxx is a specific build:

1EClient.
v5
v8.
2.
0.x.xxx.zip1EClient_Non-Windows.
v5
v8.
2.
0.
xxx.zip1EClient_Android.v5.2.0.
x.xxx.zip
  • Licenses.txt
  • 1E Client Release
    • 1E Client release Information.html
    • 1EClient-x64.msi
    • 1EClient-x86.msi
    • Licenses.txt
    • 1E
    Client Release Information
    • Client release information.html
    • 1e.client-CentOS_
    7
    • 8.1_x64_
    v5
    • v8.
    2.
    • 0.x.xxx.rpm
    • 1e.client-
    Fedora
    • Debian_
    21
    • 10.4_x64_
    v5
    • v8.
    2.
    • 0.x.xxx.
    rpm
    • deb
    • 1e.client-
    macOSX_v5.2.
    • Fedora_34_x64_v8.0.x.xxx.
    dmg
    • rpm
    • 1e.client-
    macOSX
    • macOS_
    v5
    • v8.
    2.
    • 0.x.xxx.
    pkg
    • dmg
    • 1e.client-
    openSUSE
    • macOS_
    42.1_x64_v5.2.0.xxx.rpm
    • v8.0.x.xxx.pkg
    • 1e.client-
    RHEL
    • openSUSE_
    7
    • Leap_15.
    1
    • 2_x64_
    v5
    • v8.
    2.
    • 0.x.xxx.rpm
    • 1e.client-
    SLES
    • RHEL_
    12
    • 7.
    2
    • 9_x64_
    v5
    • v8.
    2.
    • 0.x.xxx.rpm
    • 1e.client-
    Solaris
    • RHEL_
    11
    • 8.3_
    SPARC
    • x64_
    v5
    • v8.
    2.
    • 0.x.xxx.
    p5p
    • rpm
    • 1e.client-
    Solaris
    • SLES_
    11
    • 15.
    3
    • 2_x64_
    v5
    • v8.
    2.
    • 0.x.xxx.
    p5p
    • rpm
    • 1e.client-Ubuntu_
    14
    • 18.04_x64_
    v5
    • v8.
    2.
    • 0.
    xxx.deb1e.client-Ubuntu_14.04_x86_v5.2.0.
    • x.xxx.deb
    • Licenses.txt
  • 1E Client Release Information.html
  • 1E.Client-5.2.0.xxx.apk
  • Please refer to Supported Platforms: 1E Clients for details of supported OS versions and their the

    ir prerequisites.





    Advanced Panelboxes for Confluence
    id1
    titleOn this page:

    Table of Contents
    maxLevel3
    minLevel2
    indent20px
    excludeSummary|On this page|In this section...
    separatornewline


    Advanced Panelboxes for Confluence
    id1
    titleIn this section:
    Children Display
    depth2
    styleh5
    excerpttrue


    Deploying the 1E Client

    Windows computers

    When deploying 1E Client to Windows devices you can install using the MSI interactively but this only allows you to specify some configuration settings. You can configure these and some other settings using installer properties on the command-line or in one or more MST transform files. 

    Multiexcerpt include
    MultiExcerptNameWhyInstallerTransforms
    PageWithExcerptDeploying 1E Client on Windows
     

    Please refer to:

    Non-Windows devices

    Please refer to:

    1E Client settings

    Configuration settings can be set during or after installation, depending on the platform, as described in the table below. Installer command-lines are described in Deploying 1E Client on Windows.

    PlatformNotes
    Windows
    • Some settings may be set during installation and others can only be set in the configuration file
    • Setting names are not case sensitiveWindows installer properties are not case sensitive
    • You must use UPPERCASE when specifying the  name  of any installer property in a  mst  transform file, and preferably when including them in a msiexec command-line.
    • Nomad, PXE Everywhere, and WakeUp client modules have settings that are stored in the registry instead of the configuration file
    Linux
    • Settings may be set during installation or modified in the configuration file
    • Setting names are not case sensitive
    Mac and Solaris
    • Settings must be set after installation using the supplied bash script
    • Setting names are not case sensitive

    The following applies to all configuration settings that are stored in the 1E Client configuration file:

    • they can be reconfigured after installation either manually or as described in 1E Client command-line parameters
    • property names and values are not case-sensitive, but convention is to store them in mixed-case
    • if you omit a mandatory property or its value, the 1E Client will not start
    • if you omit an optional property or its value, the 1E Client will use the default value instead


    1E Client configuration file location and name

    Multiexcerpt
    MultiExcerptNameAgentConfFile

    The 1E Client is controlled via the 1E Client configuration file 1E.Client.conf which resides in the installation folder along with the 1E Client executable.

    The default installation location used for the different OS supported by the 1E Client are given in the following table:

    Section


    Column
    width50%


    OSDefault install location
    Windows%ProgramFiles%\1E\Client
    Linux and Solaris/etc/1E/Client
    Mac'/Library/Application Support/1E/Client'

    1E Client running on Android is configured using the Application Preferences interface, not based on a configuration file.



    Column


    Note

    The configuration file uses ASCII encoding.

    A comment line starts with the # symbol.



    Column
    width20%





    Installer properties

    The following are lists of all installer properties for 1E Client modules and features. Those listed in mixed case are stored in the 1E Client configuration file, and those listed in UPPERCASE are stored in the registry.

    Note

    Multiexcerpt include
    MultiExcerptNameCase-InstallerProperties
    PageWithExcerpt1E Client settings


    Configuration settings

    The following are lists of all settings stored in the 1E Client configuration file, used by 1E Client modules and features. Where relevant, the locations of Windows registry settings are provided.

    Note

    Multiexcerpt include
    MultiExcerptNameCase-FileRegistry
    PageWithExcerpt1E Client settings



    Info

    Installer properties for Windows:

    Multiexcerpt include
    MultiExcerptNameInstaller properties
    PageWithExcerpt1E Client settings



    Info

    Configuration file settings:

    Multiexcerpt include
    MultiExcerptNameConfigurationFileSettings
    PageWithExcerpt1E Client settings

    1E Client has no registry settings, however InstallationDirectory is stored in HKLM\SOFTWARE\1E\Client.


    Info

    Installer properties for Windows and non-Windows. Some settings are only available for Windows, and some are not available as installer properties.

    Multiexcerpt include
    MultiExcerptNameConfigurationFileSettings
    PageWithExcerptTachyon client settings



    Info

    Configuration file settings for Windows and non-Windows. Some settings are only available for Windows.

    Multiexcerpt include
    MultiExcerptNameConfigurationFileSettings
    PageWithExcerptTachyon client settings

    Multiexcerpt include
    MultiExcerptNameSettingsWithoutInstallerProperties
    PageWithExcerptTachyon client settings

    Tachyon client has no registry settings, however some data is stored in HKLM\SOFTWARE\1E\Client\Persist.


    Info

    Installer properties for Windows:

    Multiexcerpt include
    MultiExcerptNameInstaller properties
    PageWithExcerptNomad client settings



    Info

    Configuration file settings:

    Multiexcerpt include
    MultiExcerptNameConfigurationFileSettings
    PageWithExcerptNomad client settings

    Nomad client stores its settings under the registry key HKLM\SOFTWARE\1E\NomadBranch.

    For details of Nomad client registry settings, please refer to installer properties.


    Info

    Installer properties for Windows:

    Multiexcerpt include
    MultiExcerptNameInstaller properties
    PageWithExcerptPXE Everywhere Agent settings



    Info

    Configuration file settings:

    Multiexcerpt include
    MultiExcerptNameConfigurationFileSettings
    PageWithExcerptPXE Everywhere Agent settings

    PXE Everywhere Agent stores its settings under the registry key HKLM\SOFTWARE\1E\PXEEverywhere.

    For details of PXE Everywhere Agent registry settings, please refer to installer properties.


    Info

    Installer properties for Windows:

    Multiexcerpt include
    MultiExcerptNameConfigurationFileSettings
    PageWithExcerptShopping client settings



    Info

    Configuration file settings:

    Multiexcerpt include
    MultiExcerptNameConfigurationFileSettings
    PageWithExcerptShopping client settings

    Shopping client and WSA have no registry settings.

    WSA stores information under the registry key HKLM\SOFTWARE\1E\WSA.


    Info

    Installer properties for Windows:

    Multiexcerpt include
    MultiExcerptNameInstaller properties
    PageWithExcerptWakeUp client settings



    Info

    Configuration file settings:

    Multiexcerpt include
    MultiExcerptNameConfigurationFileSettings
    PageWithExcerptWakeUp client settings

    WakeUp client stores its settings under the registry key HKLM\SOFTWARE\1E\WakeUpAgt.

    For details of WakeUp client registry settings, please refer to installer properties.