The basic command to install an RPM package is rpm -i <package_file>. Although RPM, by design, does not support configuration during installation (with the Linux recommended approach being to configure after installation) - the 1E Client does in fact support configuration through the use of environment variables. These can be easily set in a bash command line by one or more space-separated name=value pairs preceding the install command. So, if the RPM package file name is 1e.client-RHEL_7.1_x64_v126.96.36.1995.rpm and the Tachyon Server (assuming that the switch and the background channel are both installed on the Tachyon Server) has the DNS Name FQDN tachyon.acme.local then the command to run would be:
Please refer to 1E Client configuration settings and installer properties for a list of other configuration properties that can be configured in the same way.
When the package starts to install you may notice that the ldconfig command generates a warning saying that a .py file is not an ELF file - it has the wrong magic bytes at the start.
This is because ldconfig assumes all files in /usr/lib are ELF files, and that file is a python file.
You can safely ignore this warning.
After the package is installed the application configuration files will be installed to the following directory:
After running the Linux RPM package the client is installed and started as a daemon (service).
The client certificate Tachyon.pfx and a cacert.pem file are required in the hidden directory: /etc/1E/Client/.sslcerts
If Tachyon.pfx contains the same certificate trust chain as the Tachyon Switch, then cacert.pem is optional. This is because the client will have already cached the public certificates when it parses Tachyon.pfx and cacert.pem will be duplicating the public certificate information. If Tachyon.pfx is using a different certificate trust chain from the Tachyon Switch, then cacert.pem is always required.
Please refer to 1E Client command-line parameters if you would like to see details of other CLI commands.
This method is suitable for reconfiguring all 1E Client settings on non-Windows devices because only Tachyon client features are available and all settings are stored in the 1E Client configuration file.
Each client device requires its own certificate, which must be created as a .pfx file.
Using OpenSSL to create the .pfx file
Each non-Windows devices requires its own certificate. Below is a guide for using a Microsoft CA to issue a certificate (which is the same for Windows computers), then exporting it and using OpenSSL to prepare it before installing it on the non-Windows device.
First, you will need to have created a new Certificate template on your Certificate Authority by making a duplicate of either the Computer or Workstation template and configuring it with at least the following properties:
- General - use a suitable name such as Tachyon Devices and validity period
- Request Handling - Allow private keys to be exported
- Subject Name - Allow information to be supplied in the certificate request, rather than being built from Active Directory information
- Extensions - Application Policies should contain only Client Authentication
- Security - ensure relevant users and computers will be able to request certificates.
Once the new template is created on the CA, issue it.
Using the issued template, request a certificate for a target device, and export it in .pfx form and remember the password.
The target device requires a copy of the basic cacert.pem and the .pfx file with its password removed. You can do this using the following steps. Use the relevant OpenSSL version for the OS. OpenSSL is normally available by default on Linux and Mac devices. If you want to follow these steps on Windows you will need to download the open source version appropriate to your OS.
First, extract the certificate:
Second, the CA key:
Now, the private key:
Remove the passphrase:
Put things together for the new PKCS-File (on Windows, type can be used instead of cat):
And create the new .pfx file, when prompted for a password ensure that you enter an empty password (that is press enter when prompted for the password and confirmation without entering any text):
Now you have a new PKCS12 key file without passphrase on the private key part. This Tachyon.pfx file and the cacert.pem file, must be placed in one of the following locations - depending on the OS. These are hidden folders.
Storing the .pfx on the client
The client certificate file (Tachyon.pfx), and Certificate Authority (CA) certificate(s) for the Switch certificate (cacert.pem file) are stored in the hidden directory: /Library/Application Support/1E/Client/.sslcerts
If the client certificate (Tachyon.pfx) uses the same certificate trust chain as the Tachyon Switch, then cacert.pem is optional. This is because the client will have already cached the public certificates when it parses Tachyon.pfx.
If the client certificate (Tachyon.pfx) uses a different certificate trust chain from the Tachyon Switch, then cacert.pem is always required.
The following command-line can be used to uninstall the 1E Client on Linux:
Uninstallation will leave behind files, folders and registry entries that were created after installation:
Log files remain.
The log files can be deleted or renamed. If not deleted, then a new installation that uses the same logs folder will continue to use the old log file.
|Client\Persist folder remains.|
You should keep the Persist folder, which contains status information about current instructions, only if you intend to re-install the 1E Client.