A list of installer properties for the respective installers supported by the 1E Client Deployment Assistant –  for the 1E Client (which includes clients for Tachyon, Shopping, WakeUp and Nomad), NightWatchman Agent and Web WakeUp ActiveX.


For details of additional installer properties available for each client, please refer to their respective product documentation, however any additional properties are not supported by the CDA Wizard, but can be manually added to the .mst transform files as described in Advanced configuration.



1E Client installer properties - general

These settings affect 1E Client and also affect Tachyon features of 1E Client.


Settings shown in mixed-case are stored in the 1E Client configuration file. Settings in UPPERCASE are stored in the Windows registry.


PropertyDefault valueNotes
INSTALLDIR%PROGRAMFILES%\1E\ClientWhere to install the 1E Client. The registry name is InstallationDirectory which must not be changed after installation.
LogPath%ALLUSERSPROFILE%\1E\Client\1E.Client.log
  • Log file path
  • Can be updated in AppImport.xml

This log is used by 1E Client, Tachyon features, and Shopping client. Please refer to 1E Client 5.1 - Log files.

LoggingLevelInfo
  • Log level
  • Can be updated in AppImport.xml
REBOOTReallySuppressSuppress the host from rebooting after installation.The REBOOT property is not in the base MST but is in the install command-line for Nomad in the answer file.


1E Client installer properties - Tachyon client

PropertyDefault valueNotes
Switchtachyon.acme.local:4000
  • Switch
  • Can be updated in AppImport.xml

Must have a value in order to enable Tachyon client features.

Must be set to none if Tachyon feature are not required.


BackgroundChannelUrlhttps://tachyon.acme.local:443/Background/
  • Background channel URL
  • Can be updated in AppImport.xml

Must have a value in order to enable Tachyon client features.

Must be set to none if Tachyon feature are not required.


DefaultStaggerRangeSeconds300
  • Default stagger range in seconds
  • Can be updated in AppImport.xml
Module.Inventory.Enabledtrue
  • Enable Inventory module
  • Can be updated in AppImport.xml
AuthenticationPolicyoptional
  • Authentication policy
  • Can be updated in AppImport.xml
ConnectionKeepaliveTimeInSecondsMax600
  • Maximum time for sending a keep-alive message to the Switch
  • Can be updated in AppImport.xml
ConnectionKeepaliveTimeInSecondsMin120
  • Minimum time for sending a keep-alive message to the Switch
  • Can be updated in AppImport.xml
ConnectionRetryTimeInSecondsMax900
  • Maximum time the Agent waits before trying to reconnect to a Switch after a connection failure
  • Can be updated in AppImport.xml
ConnectionRetryTimeInSecondsMin30
  • Minimum time the Agent waits before trying to reconnect to a Switch after a connection failure
  • Can be updated in AppImport.xml
ConnectionTimeout30
  • The maximum time in seconds that can elapse between initialising the connection and having a fully established websocket
  • Can be updated in AppImport.xml
CRLCheckssoft
  • Carry out CRL (certificate revolcation list) checks
  • Can be updated in AppImport.xml

CrlTimeoutInSeconds

3


This setting is not supported as an installer property. It is in the AppImport.xml and in the base MST file for 1E Client, but is not used.


EnablePayloadCompressiontrue
  • Whether the Agent should attempt to compress payloads when responding to instructions
  • Can be updated in AppImport.xml
NomadContentDownloadEnabledtrue
  • Whether to integrate with Nomad for content download
  • Can be updated in AppImport.xml
NomadContentDownloadTimeoutSecs600
  • Time limit to wait for Nomad to download content before switching to Tachyon's own download mechanism
  • Can be updated in AppImport.xml
PolicyEnabledtrue
SSLTLSv1.2
  • Switch connection security
  • Can be updated in AppImport.xml
WorkerThreads2
  • Number of instructions that will execute concurrently
  • Can be updated in AppImport.xml


1E Client installer properties - Nomad client

PropertyDefault valueNotes

Module.Nomad.Enabled

false
  • Enable Nomad client module
  • Can be updated in AppImport.xml

MODULE.NOMAD.LOGPATH

[WindowsFolder]\CCM\LogsFolder containing Nomad log file.
  • Can be updated in AppImport.xml
  • Registry value: LogFileName (registry folder plus file name)

Please refer to 1E Client 5.1 - Log files .

MODULE.NOMAD.MAXLOGSIZE

5242880 (5 MB)Maximum log size.
  • Can be updated in AppImport.xml (1MB, 5MB,10MB)
  • Registry value: MaxLogFileSize

MODULE.NOMAD.MULTICASTSUPPORT

0Multicast support (disabled by default)

MODULE.NOMAD.P2PENABLED

9Peer-to-peer support (enabled with smb with net literal names by default)

MODULE.NOMAD.MAXALLOCREQUEST

MODULE.NOMAD.MAXIMUMMEGABYTE

DisabledPeer backup assistant support.
  • Can be updated in AppImport.xml (when enabled, both MAXALLOCREQUEST and MAXIMUMMEGABYTE = 5120)
  • Registry value: NMDS\MaxAllocRequest * NMDS\MaximumMegabyte

MODULE.NOMAD.SPECIALNETSHARE

  • Default value in MSI is: 0x2020 (8256)
  • Default value used by CDA is: 0x2070 (8304)
  • Can be partly updated in AppImport.xml (Nomad hidden share & fanout)
  • Registry value: SpecialNetShare
BitHexDecimalNotes
40x001016Enable Nomad hidden share as NomadSHR$.
50x002032Disable broadcast of download statistics. When enabled, Nomad broadcasts download statistics to all peers when a download is complete.
60x004064Enable Nomad FanOut.
130x20008192Use HTTP/S or SMB. HTTP/S is automatically used if CM2012 or CB client is detected. Must be set if using CM2007 or if Nomad integration is used by Tachyon.

0x20708304


MODULE.NOMAD.SSDENABLED

3Single-site download (enabled as both consumer and provider by default)
  • Can be updated in AppImport.xml
  • Registry value: SSDEnabled

MODULE.NOMAD.SSPBAENABLED

0Single-site peer backup assistant (disabled by default)
  • Can be updated in AppImport.xml
  • Registry value: SSPBAEnabled

MODULE.NOMAD.STATUSMSGEVENTS

 0x0Status message events.

Please refer to Advanced configuration for how to use Orca to edit the base MST file to change this setting.

MODULE.NOMAD.WAKEUPENABLED

3Wakeup support (enabled for both local subnet and site by default).
  • Can be updated in AppImport.xml
  • Registry value: WakeUpEnabled


MODULE.NOMAD.WAKEUPMINPACKAGESIZEMB

100 (MB)Minimum size of content (in megabytes) to request a wake-up.

MODULE.NOMAD.SUCCESSCODES

EnabledPrevent failover to BITS (0x9999 added to default SuccessCodes)
  • Can be updated in AppImport.xml
  • Registry value: SuccessCodes

MODULE.NOMAD.USEFIPS

falseUse FIPS encryption.
  • Can be updated in AppImport.xml
  • Registry value: EncryptionType

MODULE.NOMAD.COMPATIBILITYFLAGS

1572864

  • Default value in MSI is: 0x2020
  • Default value used by CDA is: 0x2070
Enable compatibility checks.

MODULE.NOMAD.PLATFORMURL

MODULE.NOMAD.CONTENTREGISTRATION

User definedActiveEfficiency server.
  • Can be updated in AppImport.xml
  • Registry value: ActiveEfficiency\PlatformUrl
    ActiveEfficiency\ContentRegistration


1E Client installer properties - PXE Everywhere Agent

PropertyDefault valueNotes
Module.PXEEverywhere.Enabledfalse
  • Enable PXE Everywhere Agent module
  • Can be updated in AppImport.xml


1E Client installer properties - Shopping client

PropertyDefault valueNotes
Module.Shopping.Enabledfalse
  • Enable Shopping client module
  • Can be updated in AppImport.xml
MODULE.SHOPPING.SHOPPINGCENTRALURL (empty)
  • Shopping Web URL
  • Can be updated in AppImport.xml
MODULE.SHOPPING.LOOPBACKEXEMPTIONENABLED false
  • Enable Edge / Windows app browser support
  • Can be updated in AppImport.xml


1E Client installer properties - WakeUp client

PropertyDefault valueNotes
Module.WakeUp.Enabledfalse 
  • Enable WakeUp client module
  • Can be updated in AppImport.xml
MODULE.WAKEUP.REPORTINGOFF 
  • Enable WakeUp status message reporting to a NightWatchman server
  • Can be updated in AppImport.xml
  • Can also be set in registry by setting HKLM\Software\1E\WakeUpAgt Reporting REG_SZ value to "ON"
MODULE.WAKEUP.REPORTINGSERVER(empty)
  • Can be updated in AppImport.xml
  • Can also be set in registry by setting HKLM\Software\1E\WakeUpAgt\Reporting\HTTP ServiceUrl REG_SZ value
MODULE.WAKEUP.SECUREREPORTINGSERVER(empty) 
  • Can be updated in AppImport.xml

  • Can also be set in registry by setting HKLM\Software\1E\WakeUpAgt\Reporting\HTTPS ServiceUrl REG_SZ value

MODULE.WAKEUP.USEFIPS

0 (off) 
  • Enable FIPS compliance in WakeUp module
  • Can be updated in AppImport.xml
  • Can also be set in registry by setting HKLM\Software\1E\WakeUpAgt\Reporting UseFipsComplianceEncryption REG_DWORD value to 1


1E NightWatchman Agent installer properties

PropertyDefault valueNotes
REBOOTReallySuppressSuppress the host from rebooting after installation.The REBOOT property is not in the base MST but is in the install command-line for PXE Everywhere in the answer file.


Web WakeUp ActiveX installer properties

PropertyDefault valueCan be changed in the wizard?
REBOOTReallySuppressSuppress the host from rebooting after installation.The REBOOT property is not in the base MST but is in the install command-line for WebWakeUp ActiveX in the answer file.