Client hardware requirements for WoL
To utilize Wake-On-LAN (WoL) technology you need all of the following hardware configurations:
Network card - a network card which can support Wake-On-LAN. Your network card vendor can tell you if your network adapter supports Wake-On-LAN. If it does, it must be configured to enable remote wake up. Some adapter drivers are disabled by default within the operating system.
System BIOS - Wake-On-LAN must be enabled in the system BIOS. This option can usually be found in the Boot menu of the BIOS configuration program. Some BIOS have a 'Maximum Power Savings' or 'Low Power S5' option, which should be disabled in order to allow some power to the network card.
Power management - APM or ACPI should be enabled, otherwise the user of the machine should ensure that it is powered off by hitting the off button after shutdown.
A quick way to tell if a system is Wake-On-LAN ready is to power down the system then look at the network adapter display LED's. If the lights are still on, then chances are that the system is OK. Windows must have been powered down gracefully in order for it to prepare the network card.
1E also provides a diagnostic tool called Magic Test that determines if a machine can react to a magic packet wake up. Download Magic Test and other free tools from 1E’s Free Tools page.
Please contact 1E if you require guidance with WoL configuration on Windows operating systems and enterprise vendor hardware including Dell, HP and Lenovo computers.
1E NightWatchman Agent
If you are deploying WakeUp as part of a NightWatchman Enterprise power management solution then you will also need to consider 1E NightWatchman Agent requirements.