Introducing Nomad 7.0.200
Working with Nomad
Download once to branch
Download resumption and consistency checking
- Nomad Cache
Distributing software with Nomad and Configuration Manager
Downloading content for CM Software Updates from Microsoft Update
Deploying Office 365 updates
Windows 10 Express Installation Files and Delta Content for Updates
Remote differential compression integration
- Download once to branch
OS Deployment features
Operational best practices
Frequently asked questions
- Core features
The cache clean cycle versus CacheCleaner
The cache clean cycle is provided in addition to the previously used CacheCleaner, which can still be run when required (for example when reserving space for new contents to be downloaded by manually running it from the command-line). CacheCleaner deletes content based on its priority and doesn't check its last usage date. So it is possible that content which is lower in priority but has been recently used, or is used regularly (like WIM files), may also get deleted when CacheCleaner runs. This mechanism therefore acts more as an emergency option to free up disk space but may result in the deletion of content that is likely to be used (which must then be downloaded again when needed). The cache clean cycle helps to maintain the low profile of the Nomad cache by removing content that is less likely to be used.
Both of these methods are described in greater detail in the following headings.
Cleaning the cache using the cache clean cycle
From Nomad 6.3 and above a new cache clean cycle has been added that automatically runs the cache cleaner on a regular configurable interval. Nomad was designed to cache content that Configuration Manager has requested or that has been pre-cached via ActiveEfficiency. Because of this the content accumulated in the Nomad Cache can become quite extensive, with a large degree of it no longer relevant or useful. For example, a Windows software update which has been superseded by a newer update is no longer relevant or useful and can be safely removed. The cache clean cycle helps to manage the Nomad cache, remove aged and irrelevant content and minimise its impact on the host machine.
This option is configured by setting the following registry values or installer properties:
|Registry Value||Default Value||Installer Property||Description|
|CacheCleanCycleHrs||0 (turned off)||CACHECLEANCYCLEHRS|
The first automatic cache clean runs randomly between 10 to 60 mins of service start up. Subsequent cache clean cycles run after the number of hours specified.
0 means feature turned off. No cache cleaning cycle would run. Changing this registry entry performs an internal restart.
The minimum value is 4
The maximum value is 168 (Once a week)
|MaxCacheDays||0 (turned off)||MAXCACHEDAYS|
Set to delete application or package content that last triggered Nomad elections before the specified number of days from the date the cache cleaner runs.
This ensures that only application or package content that have triggered elections recently will be kept in the cache.
0 means that application and package content will not be deleted automatically when the cache cleaner runs.
|MaxPreCacheDays||0 (turned off)||MAXPRECACHEDAYS|
Set to delete pre-cached content that last triggered Nomad elections before the specified number of days from the date the cache cleaner runs.
This ensures that only pre-cached content that has triggered elections recently will be kept in the cache.
0 means that pre-cached content will not be deleted automatically when the cache cleaner runs.
|MaxSUCacheDays||0 (turned off)||MAXSUCACHEDAYS|
Set to delete software updates that last triggered Nomad elections before the specified number of days from the date the cache cleaner runs.
This ensures that only software updates that have triggered elections recently will be kept in the cache.
0 means that software updates will not be deleted automatically when the cache cleaner runs.
|DpCacheCleanupEnabled||0 (turned off)||DPCACHECLEANUPENABLED|
Deletes all LSZ files in a Distribution Point (DP) cache whose content is no longer distributed, that is not present in ContentLib.
To enable DP Cache Cleaner set the value of registry to 1 (any value except for 0 enables this feature).
Introduced from Nomad 7.0.200 and 1E Client 5.1.
As you can see from the table the cache clean cycle is turned off by default, so the registry entries must be set before it will start to regularly clean the cache.
Cache clean cycle delete conditions
When the cache clean cycle runs, it will check the type of each content and the last election date associated with it. There are four main types of content and these will be marked for deletion if the following delete conditions are true:
|Content type||Delete condition|
|Pre-cached||last election date + MaxPreCacheDays > cache clean cycle run date|
|Application or package||last election date + MaxCacheDays > cache clean cycle run date|
|Office 365 update byte-range||last election date + MaxSUCacheDays > cache clean cycle run date|
|Software updates related to SMSTSNomad jobs|
The cache clean cycle will then also check the following, for all content other than Office 365 update byte-ranges:
- The content should be present on at least one of the Nomad subnet peers with an equal or a higher percentage of content
- The network has broadcasts enabled
If both of these conditions are also true the content will be deleted.
The following points describe various caveats related to the way that the cache clean cycle works:
If pre-cache content is deleted by the cache clean cycle, but the corresponding pre-caching job still exists, the ActiveEfficiency Server will send the download notification again to the client.If your Nomad policy is to not delete pre-caching jobs you should turn of deletion of pre-cached content by setting the MaxPreCacheDays registry value to 0.
- Application upgrades and uninstallation via Software Center require content to be present on the machines (the current version is required for uninstallation and the previous version is required for upgrade scenarios). If the content has been deleted by the cache clean cycle, the content would be downloaded again at uninstall or upgrade time. Because of the way that the cache clean cycle delete conditions are applied Nomad retains one copy of the content per subnet, so even if such a download request comes the content would be downloaded from a Nomad peer and not a DP.
- ByteRange content is not checked to be present on subnet peers.
- Cache optimization does not work for content that is to be activated later on.
- Cache optimization does work on Sensitive Servers.
Cleaning the cache using CacheCleaner.exe
To maintain the cache Nomad uses a set of basic rules that lets you decide the cache's effect on overall disk usage and performs automatic cleaning when necessary. When a job is advertised, automatic cache cleaning could occur under the following circumstances:
- If the percentage of available disk space is less than the PercentAvailableDisk setting after downloading an incoming package, according to its download package size, automatic cache cleaning is initiated before the download takes place
- Nomad then assesses how much space could be cleared by deleting cache folders that are eligible for deletion. A cache folder is deemed eligible for deletion if its cache priority value is lower than or equal to the cache priority value of the incoming package. The cache priority value is set on the Nomad command-line using the pc argument, or set in the Nomad properties page when using Configuration Manager. By default, if no value is specified, packages have a cache priority of 1.
- If the assessment determines there would still not be sufficient space available: no deletion will take place, the download is aborted and an error logged, which may be one of:
- Insufficient disk or cache space available to download the Program…
- Insufficient cache space available to achieve a Max Cache Size of X
- If the assessment determines there would be sufficient space available in the cache: the folders are deleted in order according to their cache priority until the required disk space is available.
Cache cleaner and Configuration Manager
When Nomad is used with Configuration Manager the cache cleaner will also:
- Purge linked contents from the Configuration Manager cache
- Purge older versions from the Configuration Manager cache before downloading the content for a newer version
The cache cleaner mechanism also works with the priority job control to ensure that suspended lower priority job caches are not cleaned to make way for the higher priority job unless absolutely necessary.
Cache cleaner and central multicast
If you are using Nomad's Central Multicast feature, cache cleaner automatically takes into account the space required by all the concurrent jobs running before purging a cache. There is no additional configuration needed for this to happen.
Maintaining the cache manually
By default, a Nomad cache is not purged unless there is an active download. In most cases, available disk space is not really an issue but there may be circumstances where you may want to manage the cache to keep the disk usage overhead to a minimum.
You can explicitly purge the cache with
CacheCleaner command-line utility which ships with the Nomad installation. Use
CacheCleaner with the following command-line arguments, each preceded with '-'
Only cache contents with a priority equal to or lower than the
Sets the debug level for
Deletes all cache content where the priority is less than or equal to the value for Force. If the command-line does not include Force, then Deleteall deletes all cache content where the priority is 1. Works in conjunction with the Force.
The ID of the package or content to be deleted from the cache. The value must be set to the PackageID or ContentID string that identifies the content to be deleted. Must be used in conjunction with
The maximum number of days before the contents of a cache is purged. If set,
If the command-line includes Force, all caches with a priority less than or equal to
Deletes the lowest cache priority content until the set percentage of available disk is available.
Only caches with a priority equal to or lower than the
Determine the space to be cleared when running
For example, the following are equivalent:
Identifies the content version to be deleted and must be used in conjunction with DeletePkg. Deletes content from both the Nomad and Configuration Manager client caches that corresponds to the version number and the Package ID (or Content ID).
The special value -PkgVer=* may be used when the user is unsure of the specific version of the package in the cache.
In the following examples, there is no requirement to specify the path to CacheCleaner.exe because the path to Nomad executables is set in the PATH environment variable.
You can set the cache cleaner to run as a Configuration Manager program and advertise it to all Nomad systems in a single operation. You can also schedule this as a regular housekeeping job, ensuring that the cache is kept under control automatically. To purge the cache when the total free disk space is at 20%, run
To ensure that content in the cache is not kept for more than 30 days, run:
To delete a particular package and version, run:
To purge the contents of a cache with a priority of 3 or lower, run:
To purge the contents of a cache with a particular priority and size, run: