1E 23.11 (SaaS)

1E License File

Mandatory

If you wish to use a license file other than the default license.txt file, then select your own file by using the Browse button.

A license file is required to run CDA, even if it has incorrect license keys. A default file is supplied in the release root folder which can be modified to include your own license key(s), which is useful if you don't want to type them manually each time you run CDA.

At this time a license key is only required for 1E NightWatchman Agent, therefore if you are not using the Agent then please use the default file.

For guidance on how to add a license to the file, please see Licenses.txt file.

Application Content Source

Mandatory if using Configuration Manager

Enter the UNC of the Configuration Manager Application Content Source share where the wizard saves content source for use by Configuration Manager applications. The wizard will create 1E folders below it.

For example, your applications UNC may be: \\acme-server\dsl$\Applications.

Package Content Source

Mandatory if using Configuration Manager

Enter the UNC of the Configuration Manager Package Content Source share where the wizard saves content source for use by Configuration Manager packages. The wizard will create 1E folders below it.

For example, your packages UNC may be: \\acme-server\dsl$\Packages.

Distribute Content

Optional

Check this option if you want Configuration Manager to distribute application and package source to the distribution points after the wizard has been run.

When enabled, a warning is displayed indicating Distribution is enabled, which can be helpful if this option had been enabled in the AppImport.xml answer file.

Distribution Point Group

Mandatory if Distribute Content is enabled.

Select a Distribution Point Group.

Output directory

Mandatory if not using Configuration Manager.

You can enter a local drive, or a UNC path of a network share, where the wizard will save the content source that will be created by the Wizard.

Installation Files Directory

Mandatory

Tells the CDA wizard where to locate the 1E Client source files that you extracted when you unzipped the 1E Client Deployment Assistant (CDA) files. These are used to create Configuration Manager applications and packages.

Create Application

Optional

Determines if an application for the client is created in Configuration Manager.

You must check Create Application and/or Create Package option to enable and click on the Next button.

If this option is not checked, then the CDA Wizard will not copy files and create an MST transform in the Application Content Source specified in the General settings screen.

Create Application Deployment

Optional

Only enabled if you choose Create Application and determines whether a required deployment type for the application is created in Configuration Manager.

Create/Select Device Collection

Mandatory if Create Application Deployment is enabled

The device collection used to deploy the application. If specified, then the CDA wizard will also create a deployment for the application's deployment types and the specified collection.

A default name is suggested, which you can change. If the name you entered for Create/Select Device Collection does not exist, one is created. You must manually populate the created device collection after running the CDA wizard.

You can click Browse to choose from a list of existing collections which you have access to using Configuration Manager RBAC. If you do this, you will not have the option to associate the device collection with a Limiting Collection.

Limiting Collection

Mandatory if Create Application Deployment is enabled

If you are creating a new device collection, you must also choose an associated Limiting Collection.

This limits administrators to populating the new device collection with devices only from the selected Limiting Collection. By default, this is All Systems, but you can click Browse to choose from a list of existing collections which you have access to using Configuration Manager RBAC.

Create Package

Optional

Determines if a legacy package and associated install and uninstall programs for the client are created in Configuration Manager.

You must check Create Application and/or Create Package options to enable and click on the Next button.

If this option is not checked, then the CDA wizard will not copy files and create an MST transform in the Package Content Source specified in the General settings screen.

Log Path

Mandatory

The path to the 1E NightWatchman Agent logs. The default path keeps the log files together with the Configuration Manager client logs. It uses [WindowsFolder] which is a Windows installer property name that refers to the Windows folder.

Log Size

Mandatory

The size of for the NightWatchman Agent log files. We recommend 5 MB.

Use FIPS Encryption

Optional

Check this option to enable the FIPS Encryption for NightWatchman and WakeUp.

Enable NightWatchman Management Center Reporting

Optional

Check this option if you have a NightWatchman Management Center server installed, and want NightWatchman to report power state changes and retrieve policy settings.

NightWatchman Reporting Server

Mandatory if NightWatchman reporting is enabled

Enter the name of the NightWatchman Management Center server in the format:

<serverFQDN>

Where serverFQDN is normally a DNS alias.

The installer uses this name in the ServiceURL registry value for the WakeUp client, and references the AFWebService.

Select either the HTTP or HTTPS protocol.

Installation Files Directory

Mandatory

Tells the CDA wizard where to locate the 1E Client source files that you extracted when you unzipped the CDA files. These are used to create Configuration Manager applications and packages.

Create Application

Optional

Determines if an application for the client is created in Configuration Manager.

You must check Create Application and/or Create Package option to enable and click on the Next button.

If this option is not checked, then the CDA Wizard will not copy files and create an MST transform in the Application Content Source specified in the General settings screen.

Create Application Deployment

Optional

Only enabled if you choose Create Application and determines whether a required deployment type for the application is created in Configuration Manager.

Create/Select Device Collection

Mandatory if Create Application Deployment is enabled

The device collection used to deploy the application. If specified, then the CDA wizard will also create a deployment for the application's deployment types and the specified collection.

A default name is suggested, which you can change. If the name you entered for Create/Select Device Collection does not exist, one is created. You must manually populate the created device collection after running the CDA wizard.

You can click Browse to choose from a list of existing collections which you have access to using Configuration Manager RBAC. If you do this, you will not have the option to associate the device collection with a Limiting Collection.

Limiting Collection

Mandatory if Create Application Deployment is enabled

If you are creating a new device collection, you must also choose an associated Limiting Collection.

This limits administrators to populating the new device collection with devices only from the selected Limiting Collection. By default, this is All Systems, but you can click Browse to choose from a list of existing collections which you have access to using Configuration Manager RBAC.

Create Package

Optional

Determines if a legacy package and associated install and uninstall programs for the client are created in Configuration Manager.

You must check Create Application and/or Create Package options to enable and click on the Next button.

If this option is not checked, then the CDA wizard will not copy files and create an MST transform in the Package Content Source specified in the General settings screen.

Enable 1E

Optional

Check this option to enable 1E real-time client features of 1E Client to be used.

Switch

Mandatory if 1E is enabled

Enter the connection details for the 1E Switch in the format:

<DNSnameFQDN>:<port>

Where DNSnameFQDN is normally a DNS alias, as used in the 1E Switch certificate, which is normally the same as the 1E Web Server certificate.

Port is normally 4000.

Background Channel URL

Mandatory if 1E is enabled

Enter the URL list containing one or more Client Deployment Assistant Background Channel URL in the format:

https://<DNSnameFQDN1:443/Background/;https://<DNSnameFQDN2:443/Background/

Where DNSnameFQDN is normally a DNS alias, as used in the Tachyon Web Server certificate.

Default Stagger Range Seconds

Mandatory if 1E is enabled

Enter the Default Stagger Range Seconds. The default is 300 (5 minutes).

Enable Inventory Insights

Optional

Uncheck this option to disable the Inventory module of 1E Client.

Inventory Insights supports the 1E Activity Record feature (also known as Inventory, and Historical Data Capture) which is required when using the 1E Connector for AppClarity or Application Migration. You can enable this separately from 1E, but the captured data cannot be used unless it is enabled.

Enable Interaction

Optional

Uncheck this option to disable the Interaction module of 1E Client. This feature was introduced in 1E 5.1.

The Interaction module supports the User Surveys and Notifications feature (also known as 1E Client UI) which is required when using the Survey feature of Experience Analytics, and user-centric sampling features. You can enable this separately from 1E, but the captured data cannot be used unless the Tachyon is enabled.

Do not disturb

Optional

Uncheck this option to disable Do not disturb mode and allow the Client UI to show notifications from startup. Check this option to enable Do not disturb mode and stop the Client UI showing notifications, causing any surveys sent to this device to time out.

If Notification icon is enabled, users will be able to enable or disable notifications by using the Do not disturb option. However, each time the user signs in, the Do not disturb mode will be reset.

Notification icon

Optional

Uncheck this option to disable the 1E Client UI notification icon. If enabled, the icon appears shortly after the user signs in.

Sample user interaction

Optional

Uncheck this option to disable Experience Analytics sampling the performance of user interactions with application windows in user sessions.

Local port

Mandatory if Interaction is enabled

The port number used for local communication between the 1E Client service and the 1E Client UI.

Port is configurable between 100 and 65535. The default is 7766.

Enable Shopping

Optional

Check this option to enable the Shopping client module of 1E Client, which includes Windows Servicing Assistant (WSA).

Shopping Web URL

Mandatory if Shopping is enabled

Enter the Shopping Web URL in the format:

http://<serverFQDN>/Shopping

where serverFQDN is normally a DNS alias.

This option is available only if Shopping is enabled.

Enable Edge / Windows App browser support

Optional

Check this option to enable support for Microsoft Edge/Windows App browsers.

This option is available only if Shopping is enabled.

Enable WakeUp

Optional

Check this option to enable the WakeUp client module of 1E Client.

Use FIPS Encryption

Optional

Check this option to enable the FIPS Encryption for WakeUp.

This option is available only if WakeUp is enabled.

Enable NightWatchman Management Center Reporting

Optional

Check this option if you have a NightWatchman Management Center server installed, and want WakeUp to report subnet changes.

Select either the HTTP or HTTPS protocol.

These options are available only if WakeUp is enabled.

This option is especially useful for computer which change location frequently. WakeUp reports subnet changes immediately, whereas NightWatchman reports changes according to its inventory reporting schedule. WakeUp only supports Wake-on-LAN for wired connections and not for wireless, therefore a laptop reporting a subnet change from wired (docked) to wireless helps the WakeUp Server avoid wakeup attempts on the wired connection, and a wakeup failure will be attributed to the wireless subnet.

NightWatchman Reporting Server

Mandatory if NightWatchman Reporting is enabled

Enter the name of the NightWatchman Management Center server in the format:

<serverFQDN>

Where serverFQDN is normally a DNS alias.

This option is available only if WakeUp is enabled.

The installer uses this name in the ServiceURL registry value for the WakeUp client, and references the AFWebService.

Enable Nomad

Optional

Check this option to enable the Content Distribution client module of 1E Client.

Log Path

Mandatory if Content Distribution is enabled.

Enter the path to the logs. The default path keeps the log files together with the Configuration Manager client logs. It uses [WindowsFolder] which is a Windows installer property name that refers to the Windows OS folder.

This default is useful for client OS. For location may be different for CM servers. For example CM logs on a Management Point server may be located in C:\Program Files\SMS_CCM\Logs if the MP roles was installed prior to the CM client.

Log Size

Mandatory if Content Distribution is enabled.

Select the size of for the log files. We recommend 5 MB.

Hidden Content Distribution Share

Optional

Check this to enable the hidden share feature and to prevents end-users from accidentally accessing the share.

Fanout

Optional

Check this to enable the Fanout feature. This feature is especially useful in large organizations with many networks.

Prevent Failing Over to BITS

Optional

Check this to prevent downloads from reverting to using BITS if an error occurs. It ensures that any download errors are reported back effectively with minimum impact on remote sites.

Use FIPS Encryption (v6 onwards)

Optional

Check this to ensure that Content Distribution is FIPS compliant in its communications.

Delivery Optimization Reporting

Optional

Check this to enable Content Distribution to monitor and report on Delivery Optimization (DO) downloads.

Delivery Optimization monitoring and reporting is only supported in full versions (OS with UI) of Windows Server 2016 and Windows 10 Version 1909 onwards.

You must have 1E enabled and 1E Platform installed for this feature to work.

Single Site Download (SSD)

Optional

Check this to enable Content Distribution single-site download feature where Content Distribution master caches can service an entire local site not just the local subnet.

You must have 1E enabled and 1E Platform installed for this feature to work.

See also SSPBA below.

WakeUp Integration

Optional

Check this to enable WakeUp integration so that machines where the Content Distribution cache contains a particular package can be used by the Nomad master even if the machine with the cache is currently switched off.

You must have 1E enabled and 1E Platform installed for this feature to work.

You will also need NightWatchman and WakeUp system.

Peer Backup Assistant (PBA)

Optional

Check this to enable Content Distribution PBA feature. See also SSPBA below, and SDD above.

This OS deployment feature enables Content Distribution to be used as a data store for USMT data to migrate user settings from the old OS to the new one. It removes the necessity for specifically provisioning state migration points or servers to hold the backup data.

Single Site Peer Backup Assistant (SSPBA)

Optional

Check this to enable Content Distribution SSPBA feature (only enabled if Peer Backup Assistant is checked).

You must have 1E enabled and 1E Platform installed for this feature to work.

See also SSD above.

P2P Protocol

Optional

Check one or more of the following:

When selecting HTTPS you can also check one or both of the following:

Enable PXE Everywhere

Optional

Check this option to enable the PXE Everywhere client module of 1E Client.

Log Path

Mandatory

The path to the PXE Everywhere logs. The default path keeps the PXE Everywhere log files together with the Configuration Manager client logs. It uses [WindowsFolder] which is a Windows installer property name that refers to the Windows folder.

Log Size

Mandatory

The size of for the PXE Everywhere log files. We recommend 5 MB.

Use FIPS Encryption

Optional

Check this to ensure that PXE Everywhere is FIPS compliant in its communications. This is only available from PXE Everywhere 3.0 and later.

Windows ADK location

Mandatory

The location of the Windows ADK. If this has been installed on a Configuration Manager site server, the location should be:

C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit

PXE Everywhere requires that certain files are in its TftpRoot folder in order to be able to service PXE requests. These files mostly come from the winpe.wim file in the WinPE addon for the Assessment and Deployment Kit (ADK). 1E cannot bundle these files with PXE Everywhere because Microsoft does not allow their redistribution. The wizard automates this process by creating a CAB file and MST data so that the boot files are put in place as PXE Everywhere is installed. So you must locate the Windows ADK that will be used as the source.

PXE Everywhere Central web service

Mandatory

The full URL of the PXE Everywhere Central web service which the agent uses:

http://<serverFQDN>/PXELite/PXELiteConfiguration.asmx

You must have PXE Everywhere Central installed for this feature to work.

Enable support for DHCP Snooping

Optional

Check this to enable support for DHCP Snooping.

This feature requires you have at least one PXE Everywhere Responder installed, and configured your network to forward PXE requests to the Responder(s) on the specified DHCP port, and authorize them to receive and respond to requests.

When you enable this option, you can also specify the DHCP port that the PXE Everywhere Agents listen for responses from the Responder. If you change this then you must configure Responders to use the same port. By default, this is port 2067.

If you do not check the DHCP Snooping option, then you do not need Responders and PXE Everywhere Agents listen for responses on port 67.